Errors a couple of VoIP Traffic, then you’re on the proper Article. Welcome to the VoIP Guide of VoiceHub Telecom.
The timeout error codes: SIP ERROR 408 Request Timeout and Sip error 504 Server Timeout. Now start to mend the error codes and clear the traffic from SIP ERROR-504 and SIP ERROR-408.
1.Sip error-408 Request Timeout
If you see the request wasn’t answered or wasn’t able to get a reply from the opposite side then we get the Sip error 408 Request Timeout error code. Or check your “soft switch” attend Termination Reason and you see the Error Code: 408 Request Timeout, which suggests your voip provider side Error issue.
The consequences of Request Timeout:
Now we will analyze the results of this error code under two main headlines. Also, these two main titles are being divided into many subtitles.
The 1st consequence of the Sip error 408 is high PDD.
The 2nd consequence is low ASR
Those two consequences are the stats that aren’t desired to be observed within the traffic. High PDD (Post Dial Deal) and low ASR (Average Success Rate) are one in every of the foremost undesired situations for VoIP.
Why does it happen?
The main reason for getting this error code is about network problems or “vos3000 switch installation error”.
We receive this error while our request isn’t being transferred to the opposite side call or the opposite side’s answer isn’t being transferred to us. And after ages, because there’s no answer to the invite message, the decision reaches timeout request.
How can we determine Sip error 408?
In situations where ASR is low and PDD rates high, we are able to determine the Sip error 408 by making CDR rates analyze the test.
The problem solution for Sip error 408
You should get in grips with the seller side and inform them about the case. If there’s a network problem with the opposite side, we should always figure it out 1st.
2.SIP ERROR-504 Server Timeout
If the server reaches timeout then it’s code that we are visiting receive.
The consequences of Sip error 504 Server Timeout
Like SIP ERROR 408 Request Timeout error code, Sip error 504 has also the identical consequences;

• High PDD
• Low ASR
  This is the important results of the Request timeout codes. Long dial tone time and too many unsuccessful call attempts.
  The reasons for Sip error 504 VoIP Sip Codes:
  While we are sending a message and also the receiver doesn’t answer, we get this error and also if we can’t send the decision, we receive again.
  What can we do to resolve the issue?
  You can check the IP and determine the IP that encompasses a problem, give information to your vendor side.
  Can’t you continue to solve your problems with Sip error Codes?
  We are looking forward to hearing from you! we will help to you about all of your VoIP questions and telecom with our expertise quite 15 years in business.